<

Dust suppression

Socket Head Drum Sprays Code 850

The Conflow Code 850 Series - Stainless Steel Socket Head Drum Sprays provide a wide range of spray forms for pick flushing on cutting drums.

Choice of orifice diameter, screw thread and spray form allows for the many different applications required. The socket design allows the spray head to be set flush into the housing or the valve itself for maximum protection.

A nylon male/female insert can be fitted between spray and vane to enable easier removal and replacement of the sprays. Option available which incorporates a split pin to prevent spray blockage.

Typical Applications

  • Pick flushing on light to medium duty cutting forms
  • Dust suppression on Longwall shields

Features

  • 1/4", 3/8" AND 1/2" sizes available (BSP or NPT)
  • Orifices from 1.0mm to 3.2mm
  • Maximum working pressure 105 bar
  • Hollow or solid cone and jet spray forms
  • Stainless steel construction
  • Available with integral filters
Inlet Size Spray Form Dia Orifice (mm) Orifice (inches) Spray Angle (@ 10 bar) Flowrate (LPM) at Pressure (BAR)
          3.5 10 17.5 25
1/4" Hollow cone 1.6 0.06 65 1 2 2.5 3
3/8" Hollow cone 1.6 0.06 30 2 4 4.5 5.5
3/8" Solid cone 1.6 0.06 20 20 3.5 4.5 5.5
1/4" Jet 1.6 0.06 0 2.5 4.5 6 7.5
1/4" Jet 2.4 0.09 5 9 14 17 18.5
1/4" Jet 3.2 0.13 10 12 20 24.5 28
1/4" Jet 4.8 0.19 8 23.5 40 48 55
3/8" Jet 1.6 0.06 0 2 4.5 6 7
3/8" Jet 2.4 0.09 5 9 14 17 18.5
3/8" Jet 3.2 0.13 10 12 20 24.5 28
3/8" Jet 4.8 0.19 8 24 40 48 55
1/2" Jet 1.6 0.06 0 2 4.5 6 7.5
1/2" Jet 2.4 0.09 5 9 14 17 18.5
1/2" Jet 3.2 0.13 10 12 20 24.5 28
1/2" Jet 4.8 0.19 8 24 40 48 55
1/8” Jet 2.4 0.09 5 9 14 17 19
1/4" Jet (filter) 1.6 0.06 5 2 3.5 4.5 5.5
1/4" Jet (filter) 2.4 0.09 0 6 9.5 11.5 13
1/4" Jet (filter) 3.2 0.13 0 9 14 17 19.5
1/4" Jet (filter) 4.8 0.19 10 16 29 34.5 39
3/8" Jet (filter) 1.6 0.06 0 2 3.5 4.5 5.5
3/8" Jet (filter) 2.4 0.09 0 6 9.5 11.5 19.5
3/8" Jet (filter) 3.2 0.13 0 9 14 17 29
1/2" Jet (filter) 1.6 0.06 0 6 9.5 11.5 19.5
1/4" Jet (split pin) 1.6 0.06 0 2 4 5 6.5
1/4" Jet (split pin) 2.4 0.09 8 5.5 9.5 10.5 11
1/4" Jet (split pin) 3.2 0.13 10 7 11 13 14.5
1/4" Jet (split pin) 4.8 0.19 10 8 15 19 20
3/8" Jet (split pin) 1.6 0.06 0 2 4 5 6
3/8" Jet (split pin) 2.4 0.09 8 5.5 9 11 11
3/8" Jet (split pin) 3.2 0.13 10 7 11 13 14.5
3/8" Jet (split pin) 4.8 0.19 10 8 15 19 22