<

Dust suppression

Hexagon Head Drum Sprays Code 800

The Conflow Code 800 Series - Stainless Steel Hexagon Head Drum Sprays provide a wide range of spray forms for pick face flushing on cutting drums.

Choice of orifice diameter, screw thread and spray form allows for the many different applications required.

The hexagon head design offers an alternative fitting option to the socket head type, where corrosion is a problem and difficulties in replacing sprays can be encountered.

A nylon male/female insert can be fitted between spray and vane to enable easier removal and replacement of the sprays. Option available which incorporates a split pin to prevent spray blockage.

Typical Applications

  • Pick flushing on light to medium duty cutting forms.
  • General dust suppression.

Features

  • 1/4", 3/8" AND 1/2" sizes available (BSP or NPT).
  • Orifices from 1.0mm to 3.2mm.
  • Maximum working pressure 105 bar.
  • Hollow or solid cone and jet spray forms.
  • Stainless steel construction.
Inlet Size Spray Form Dia Orifice (mm) Orifice (inches) Spray Angle (@ 10 bar) Flowrate (LPM) at Pressure (BAR)
          3.5 10 17.5 25
1/4" Hollow cone 1.6 0.06 20 2 3.5 4.5 5
1/4" Hollow cone 2.4 0.09 15 4 6.5 8 9.5
1/4" Hollow cone 3.2 0.13 50 4 8.5 11 13.5
1/4" Hollow cone 1.4 0.06 30 1.5 3 3.5 4
1/4" Hollow cone 1 0.04 30 0.1 0.5 0.5 1
1/4" Solid cone 1.3 0.05 30 1.4 2.6 3.3 3.7
3/8" Solid cone 1.6 0.06 20 2 3.5 4.5 5
3/8" Solid cone 2.4 0.09 15 4 6.5 8 9.5
3/8" Solid cone 3.2 0.13 50 4 8.5 11 13.5
3/8" Solid cone 1 0.04 30 0.1 0.5 0.7 1
3/8" Solid cone 1.2 0.05 30 0.5 1.5 2 2.5
1/4" Jet 1.6 0.06 0 3 5 6 6.5
1/4" Jet 2.4 0.09 5 8 11 14 15.5
1/4" Jet 3.2 0.13 5 10 19 24 28
3/8" Jet 1.6 0.06 0 3 5 6 6.5
3/8" Jet 2.4 0.09 5 8 11 14 15.5
3/8" Jet 1 0.04 0 0.1 0.5 0.7 1
3/8" Jet 1.2 0.05 0 0.5 1.5 2 2.5
1/2" Jet 1.6 0.06 0 3 5 6 6
1/2" Jet 2.4 0.09 5 8 11 14 15.5
1/2" Jet 3.2 0.13 5 10 19 24 28
1/4" Jet (filter) 1.6 0.06 4 1 2.5 3 3.3
1/4" Jet (filter) 2.4 0.09 0 2 2.5 3.5 4
3/8" Jet (filter) 1.6 0.06 4 1 2 3 3.3
3/8" Jet (filter) 2.4 0.09 0 2 3 3.5 4
3/8" Jet (filter) 1 0.04 4 - 0.8 1.1 1.6
1/2" Jet (filter) 1.6 0.06 4 1.1 2.3 2.9 3.2
1/2" Jet (filter) 2.4 0.09 0 1.8 2.7 3.6 4.1
1/4" Jet (split pin) 2.4 0.09 10 4 7 9 11
1/4" Jet (split pin) 3.2 0.13 20 6 11 14 16
3/8" Jet (split pin) 2.4 0.09 10 4 7 9 11
3/8" Jet (split pin) 3.2 0.13 20 6 11 14 16
1/2" Jet (split pin) 2.4 0.09 10 4 7 9 11
1/2" Jet (split pin) 3.2 0.13 20 6 11 14 16
1/2" Hollow cone 2.4 0.09 50 3 5 7 8
3/8" Hollow cone 2.4 0.09 50 3 5 7 8
3/8" Hollow cone 1.6 0.06 40 1.5 3 3 4.5